sd38_2 @ 12/15/2012 05:52
Awesome, another 920 fan. You can pull that voltage down some on the CPU. unless it really needs it. 4ghz only needed 1.335V so i don't know why 4.5 would need 1.5. then it's all extra heat.(1.4 or 1.45 should be enough.)

jeffgoatley @ 03/10/2012 09:03
Great looking Rig!!!

SniperOZ @ 01/29/2012 23:21
Thanks for the coments guys:) OK... For those asking why the GPUs are not hooked up in parallel........In pic 5 I show that I'm using 2 differnet GPU waterblocks....The GTX 260,s had a PCB Change (quit a few), unfortunatly I had 2 off one and one off another,and the inlet and out let of the different blocks don't line up ...by about 2mm so no fitings will work...so this is what I came up with....and it worked flawlesly, all blocks where within 2C off each other under load.....I think with the overclocks and results in vantage speak for themselves on how well this loop worked, Cheers Snipe

The Ronin @ 01/26/2012 03:34
wouldnt u improve your flowrate greatly by going parallel all the way down. by putting that one card in series u put backpressure on the first 2 cards reducing your flow. i actually like the look of it just not the function

Mkvarner @ 01/21/2012 18:15
That processor is a way overkill for those graphics cards.

Resinball @ 11/29/2011 08:57
I only got 1 question... why the hell are you running 1 card in series and the other 2 in parallel?

XeCuteU @ 11/19/2011 16:44
awsome rig man...+1

Odawg2008 @ 11/17/2011 00:03
I really Like your design on the GPU loop near the SLI Bridge, looks great +1

takuhari @ 11/12/2011 17:10
Just gotta say... you deserve to win with that build... congratz^^

SniperOZ @ 10/07/2011 21:40
Thanks Guys although I didn't see this till now so not sure If i Can collect. :(

Total Comments: 35