FrankenHybrid-X

 
  • System Owner: JasonSauce
  • 3DMark Fire Strike: 0
  • 3DMark 11: 0
  • Community Score: 0
  • 3DMark Vantage:
  • 3DMark 06: 0
  • SuperPi 32M:
  •  
 

System Details

Component Type Brand Product

Motherboard Gigabyte Gaming 7 Z977X
CPU Intel Core i7 4790k
Frequency: 4.4 GHz FSB / QPI: Default Multiplier: x44 x Stepping: Default
VCore: 1.25 v VTT Voltage: Default PLL Voltage: Default
RAM G-Skill F3-2133C9
Frequency: Default Timing: Default Voltage: Default
Graphics Card EVGA 2x 980 Ti SC 4995
GPU Frequency: Default Shader Frequency: Default Memory Frequency: Default SLI: Yes
Monitor
ASUS
ROG PG279Q
Monitor
ASUS
ROG PG279Q
Cooling
Corsair
H100i GTX
Case
Fractal Design
Define S
Power Supply
EVGA
1000W P2
Hard Drive
Samsung
1TB Pro SSD
Hard Drive
Samsung
512mb Evo SSD
Hard Drive
Toshiba
3 TB storage X2
 

Notes

A few things I need to do cable management wise still need to be done. Need to order a few custom Sata cables to help clear up some stuff in the back of the case so I can run the GPU power cables back there. New SLI bridge will be ordered. Matching fans will be ordered.

So what I ended up doing was ordering 2 Titan-X reference stock coolers. Did the normal install steps for installing the 2 980 Ti hyrbid AIO's. I had to remove the 990 Ti heat spreader on the VRMs due using the Titan-X coolers. Over all the install was very straight forward. I have both 120 rads and fans setup to pull in fresh air. I have a single 120mm fan to help push some of the hot air that they will create under load out of the system.

Comments

No comments have been posted about this system.    Total Comments 0
 

Post new comment