Cosmos

System Details

Component Type Brand Product

Notes

    Loved the look of the InWin 901 and really wanted to challenge myself by installing a custom water cooling loop.  Made a couple mods to the case.  I cut a hole large enough for tubing to pass through by the GPU to get to the pump.  The pump blocks all my GPU ports except for one display port and that was by design (just barely fit!).  
    I'm running an EVGA z97 stinger Core3D with a 4690k clocked at 4.4ghz at 1.200mv.  CPU is cooled by an EKWB Supremacy Evo Acetal/Copper waterblock in series with an EK Res X3 reservoir into an EK DCP 2.2 water pump,  and an EK Coolstream PE 120mm radiator.  Ram is G.Skill Ripjaws X 8gb 1600mhz.  GPU is an EVGA 980Ti ACX 2.0+ +250mhz on the core  +400mhz on the memory.  All Noctua fans.  Powered by an EVGA Nex650G PSU.  OCZ 240gb ssd, WD Blue 1tb, WD Green 1tb hard drives.  Monsoon and Bitspower fitting used in cooling loop.  

Idle CPU temperature is 28c at 25.8c (ambient)
Gaming Load CPU temperature is 56c at 25.8c (ambient)
Noise isn't too bad, would like to watercool the GPU but I don't see a good way to do that in this case with the size and current loop setup, no place for 240 rad. 

Comments

Posted By Date Text

   Total Comments 1

Post new comment